Service Infiniti QX4 since 1996 of release
1. Introduction
2. The maintenance instruction
3. Routine maintenance
4. The engine
5. Cooling and heating systems
6. Power supply systems and managements
7. Start and charge systems
8. A transmissionnaja line
9. Brake system
9.1. Specifications
9.2. System of antiblocking of brakes (ABS) - the general information and codes of malfunctions
9.3. Check of a condition and replacement of brake lines and hoses
9.4. Replacement колодок disk brake mechanisms of forward wheels
9.5. Removal and installation of a support of the disk brake mechanism
9.6. Removal and installation of a brake disk
9.7. Replacement of brake boots of drum-type brake mechanisms of back wheels
9.8. Removal and installation of the main brake cylinder (ГТЦ)
9.9. Removal and installation of assemblage of the vacuum amplifier of brakes
9.10. Prorolling of brake system
9.11. Adjustment of a drive of a lay brake
9.12. Adjustments of a pedal of a foot brake
9.13. Adjustment of a spring of the valve-regulator sensitive to loading (LSV)
9.14. Adjustment of gauges-switches of stoplights and темпостата
9.15. Removal and hydromodulator ABS installation
9.16. Removal and G-gauge installation
9.17. Check of serviceability of functioning of wheel gauges ABS
9.18. Check of serviceability of functioning of the G-gauge
9.19. Check of serviceability of functioning of the relay приводного the hydromodulator electromotor
9.20. Check of serviceability of functioning of the relay of the electromagnetic valve of hydraulic modulator ABS
10. A suspension bracket and a steering
11. A body
12. An electric equipment
 












9-14-regulirovka-datchikov-vyklyuchatelejj-stop-signalov-i-tempostata.html

9.14. Adjustment of gauges-switches of stoplights and темпостата

Both gauges are located under the panel of devices on an arm of a pedal of a foot brake (Adjusting parametres of a pedal of a foot brake see an illustration).

 PERFORMANCE ORDER

  1. Adjust height of position and size of a free wheeling of a pedal of a foot brake (Adjustments of a pedal of a foot brake see).
  2. Measure backlash size between the corresponding gauge and the pedal lever. The rating value makes 0.25—1.00 mm. In case of need release a counternut and make necessary adjustment by gauge rotation.
  3. Having finished adjustment, reliably tighten a counternut.

On page back
9.13. Adjustment of a spring of the valve-regulator sensitive to loading (LSV)
On the following page
9.15. Removal and hydromodulator ABS installation