Service Infiniti QX4 since 1996 of release
1. Introduction
2. The maintenance instruction
3. Routine maintenance
4. The engine
5. Cooling and heating systems
6. Power supply systems and managements
7. Start and charge systems
8. A transmissionnaja line
8.1. 4-step automatic transmission
8.2. A distributing box
8.3. Differentials, power shafts / semiaxes
8.3.1. The general information and check of a condition of components
8.3.2. Removal and installation of differentials
8.3.3. Replacement of a sealing lining of forward differential
8.3.4. Removal and installation of a connecting flange and replacement of an epiploon of back differential
8.3.5. Removal, service and installation of the oil pump
8.3.6. Removal and installation of back semiaxes
8.4. Kardannye shaft
9. Brake system
10. A suspension bracket and a steering
11. A body
12. An electric equipment
 












8-3-4-snyatie-i-ustanovka-soedinitelnogo-flanca-i-zamena-salnika-zadnego-differenciala.html

8.3.4. Removal and installation of a connecting flange and replacement of an epiploon of back differential

 PERFORMANCE ORDER

  1. Remove propeller a shaft (Removal and installation карданных shaft see).
  2. By means of a special key (J34311) give a nut of a leading gear wheel.
  3. By means of a suitable stripper remove a connecting flange.
  4. Having hooked, take from a landing nest an epiploon.
  5. By means of cylindrical send (KV38102510) plant a new epiploon.

In quality send the replaceable face head of the corresponding size, or a piece of a pipe of suitable diameter will approach.

  1. The further installation is made in an order, the return to an order of dismantle of components, - track, that all fixture has been tightened with demanded effort.


On page back
8.3.3. Replacement of a sealing lining of forward differential
On the following page
8.3.5. Removal, service and installation of the oil pump