Service Infiniti QX4 since 1996 of release
1. Introduction
2. The maintenance instruction
3. Routine maintenance
4. The engine
5. Cooling and heating systems
6. Power supply systems and managements
7. Start and charge systems
8. A transmissionnaja line
8.1. 4-step automatic transmission
8.2. A distributing box
8.2.1. The general information
8.2.2. Removal and installation of a distributing box
8.2.3. Removal and installation приводного the electromotor of an actuation mechanism of a distributing box
8.2.4. Replacement of the oil filter of a distributing box
8.2.5. Replacement of epiploons of a target shaft of a distributing box
8.2.6. Replacement of an epiploon of a rod of switching of a distributing box
8.3. Differentials, power shafts / semiaxes
8.4. Kardannye shaft
9. Brake system
10. A suspension bracket and a steering
11. A body
12. An electric equipment
 












8-2-3-snyatie-i-ustanovka-privodnogo-ehlektromotora-ispolnitelnogo-ustrojjstva-razdatochnojj-korobki.html

8.2.3. Removal and installation приводного the electromotor of an actuation mechanism of a distributing box

 PERFORMANCE ORDER

  1. Disconnect from a distributing box electroconducting.
  2. Disconnect from the electromotor of an actuation mechanism of a distributing box a tube сапуна.
  1. Turn out fixing bolts and remove the electromotor.

The sealing ring is subject to replacement without fail.


Installation

 PERFORMANCE ORDER

  1. Grease a new sealing ring with technical vaseline or fresh ATF.
  2. Plant a ring and establish the electromotor on the regular place, having tracked correctness of combination of directing ledges.
  3. Tighten fixing bolts with demanded effort (41—48 Nanometers).
  4. Connect to the motor a tube сапуна.
  5. Restore initial connection of electroconducting.


On page back
8.2.2. Removal and installation of a distributing box
On the following page
8.2.4. Replacement of the oil filter of a distributing box