Service Infiniti QX4 since 1996 of release
1. Introduction
2. The maintenance instruction
3. Routine maintenance
4. The engine
5. Cooling and heating systems
6. Power supply systems and managements
7. Start and charge systems
8. A transmissionnaja line
8.1. 4-step automatic transmission
8.1.1. The general information
8.1.2. Problem diagnostics АТ - the general information
8.1.3. The Elektronno-hydraulic control system 4-step АТ
8.1.4. Removal and transmission installation
8.1.5. Replacement of an epiploon of lengthening of transmission
8.1.6. Removal and installation of cooler ATF
8.1.7. Removal and installation клапанной assemblages of a hydraulic contour of management АТ
8.1.8. Removal, check of a condition and installation приводного a cable of blocking of switchings
8.1.9. Adjustment of a drive of switching АТ
8.1.10. Adjustment of the gauge-switch of positions АТ / start permissions
8.1.11. Major repairs АТ
8.2. A distributing box
8.3. Differentials, power shafts / semiaxes
8.4. Kardannye shaft
9. Brake system
10. A suspension bracket and a steering
11. A body
12. An electric equipment
 












8-1-9-regulirovka-privoda-pereklyucheniya-at.html

8.1.9. Adjustment of a drive of switching АТ

 PERFORMANCE ORDER

  1. Translate the lever of the selector from position Р in position 1, - pass of each tooth should be defined distinctly to the touch, otherwise, and also in case of failure of the index of position of the lever, make necessary adjustment of a drive.
  1. Return the lever in position Р, then release counternuts coupling муфты.
  1. Having delayed the lever of the selector towards position R (without button squeezing), rotation coupling муфты try to achieve its combination with the cable core.
  1. Release муфту on one turn and tighten counternuts with demanded effort. (4.4—5.9 Nanometers).
  1. Having translated the selector lever in position 1, make sure of smoothness of its moving.


On page back
8.1.8. Removal, check of a condition and installation приводного a cable of blocking of switchings
On the following page
8.1.10. Adjustment of the gauge-switch of positions АТ / start permissions