Service Infiniti QX4 since 1996 of release
1. Introduction
2. The maintenance instruction
2.1. Access, protection
2.2. Elements of systems of safety
2.3. The car equipment, an arrangement of devices and controls
2.3.1. The panel of devices - the general information
2.3.2. A combination of devices
2.3.3. The display of a conclusion of compass readings and the gauge of temperature of external air
2.3.4. Controls and the salon equipment
2.4. Comfort
2.5. Operation receptions
2.6. A mode of operation in emergencies
3. Routine maintenance
4. The engine
5. Cooling and heating systems
6. Power supply systems and managements
7. Start and charge systems
8. A transmissionnaja line
9. Brake system
10. A suspension bracket and a steering
11. A body
12. An electric equipment
 












2-3-4-organy-upravleniya-i-oborudovanie-salona.html

2.3.4. Controls and the salon equipment

Left подрулевой the switch serves for switching of modes of functioning of running lighting and alarm devices, and also for activation of indexes of turns.


Activation of running fires and inclusion of a passing light of headlights

For activation of running fires turn the face handle of the lever подрулевого the switch in the first fixed position.

Thus there will be an inclusion of forward and back dimensional fires, lanterns of illumination of licence plate and illumination of the panel of devices. For transfer of headlights in a passing light mode it is necessary to turn the face handle of the main switch in the second fixed position — all other running fires will continue to function in a former mode.

For the purpose of economy of the expense of the electric power ignition deenergizing function of automatic switching-off of external lighting devices (including antifog headlights) on the expiration of 45 seconds after ignition deenergizing is provided. In similar result results also opening of any of forward doors of the car. If the face handle подрулевого the switch is left any of working positions or, it is enough to make ignition inclusion for activation of lighting devices.

Repeated activation of external lighting devices with the help подрулевого the switch after their automatic switching-off leads to blocking of function of automatic switching-off, — in order to avoid risk подсадки the storage battery, do not forget to return the face handle of the switch in position OFF, leaving the car for long term. Also avoid long use of external illumination at the idle engine.


Running fires of day time of days (only the Canadian models)

On running fires of day time of days equipped with system (DRL) headlight models join in a mode of a luminescence with small intensity at the started engine and the removed lay brake. The face handle left подрулевого the switch thus can be both in position, and in position OFF. For transfer of headlights in a passing light mode it is necessary to turn the handle in position. For deactivation DRL it is necessary to switch off ignition, having turned a key in position OFF.


Activation of a headlight of headlights

There are two ways of activation of a headlight of headlights: the first means headlight inclusion in the constant mode, the second is used for the alarm system by a headlight.

For headlight activation in a constant mode it is necessary to wring out the lever left подрулевого the switch from itself, having translated it in the fixed position. In the given mode headlight inclusion is obviously possible only at included running fires (see above).

For short-term activation of a headlight for the purpose of the alarm system it is enough to delay the switch lever on itself, — отпускание the lever will lead to headlight switching-off. Short-term inclusion of a headlight is made irrespective of, in what position there is a rotary face handle of the main switch see above).


Activation of antifog headlights

The rotary ring switch of management is located with functioning of antifog headlights on the handle of the lever left combined подрулевого the switch and can be established in one or the other fixed positions: OFF (Выкл) or.


Activation of antifog headlights is represented possible only at the included passing light.


Inclusion of indexes of turns

Inclusion of indexes is made by means of the lever left combined подрулевого the switch. The lever is translated upwards or downwards, in dependence of the chosen direction of a course change.

While translating the lever in extreme top / bottom position (before click) corresponding indexes of turns will continue to function until the steering wheel will not be returned in rectilinear position, or the lever will not be returned in the central position compulsorily.

Short-term inclusion of indexes, for example, for example, at intention to replace рядность movements, is made by easy procrastination of the lever upwards or downwards, accordingly.


Right combined подрулевой the switch

Right подрулевой the switch is intended for management of functioning of cleaners and washers of wind and back glasses.


Management of functioning of cleaners and windscreen washers

Inclusion of cleaners / of washers of a windscreen can be made only at the included ignition (positions ON and АСС).

The choice of modes of functioning of screen wipers is made by moving of the lever of the switch downwards / upwards. Parametres of an interval mode of functioning of screen wipers (in a range of 4-12 seconds) can be chosen by means of the rotary face handle on the lever end (see in the same place).


Screen wipers should be included in frosty weather only after the windscreen will be heated-up!

For giving on glass of a washing liquid it is necessary to pull the switch lever on itself, — screen wipers also should join on some cycles.

It is not necessary to include washers more than for 30 seconds. It is not necessary to make attempts of inclusion of giving of a liquid at the empty tank.


Management of functioning of a cleaner and washer of back glass

Activation of a cleaner / of a washer of back glass can be made only at the included ignition (positions ON and АСС).

For screen wiper inclusion in an interval mode of functioning turn the ring handle on the lever подрулевого the switch on one division clockwise, having translated it from neutral (OFF) positions in position. Handle turn on one division leads to inclusion низкоскоростного a mode of functioning of a screen wiper.


Activation of a back screen wiper can be made only at closed back glass, and glass closing should be made at the switched off screen wiper. Opening of back glass at a working screen wiper also is not obviously possible.


The screen wiper should be included in frosty weather only after back glass will be heated-up!

For giving on glass of a washing liquid it is necessary to turn the handle against the stop in any direction, — the screen wiper also should join on some cycles.

It is not necessary to include giving of a washing liquid more than for 30 seconds! It is not necessary to make attempts of inclusion of giving of a liquid at the empty tank!


Regulator of intensity of illumination of the panel of devices

The regulator of intensity of illumination is built in in the panel of devices of the car more to the left of a steering column (the Scheme of an arrangement of controls see the panel of devices of the car an illustration). Demanded intensity of illumination of the panel is made by potentiometer rotation.


The regulator starts to function only at included running fires (see above).


The switch of the emergency light alarm system

Alarm system inclusion is made by отжимания the push-button switch which has been built in in the central part of the panel of devices of the car (to the right of a steering wheel, under дефлектором the central air line of ventilation / of heating of salon, — the Scheme of an arrangement of controls see the panel of devices of the car an illustration) and usually equipped with a control lamp with the pictogramme representing two entered one in another of triangles.

Alarm system inclusion can be made in any position of the ignition key and leads to simultaneous operation of all four indexes of turns (and their control lamps on an instrument guard of the car) the Alarm system is intended for the prevention of other participants of traffic of the compelled stop of the car and used also in other dangerous situations provided by rules of traffic.

At the included alarm system indexes of turns will not function!


The switch of electroheating of back glass / external rear-view mirrors

The push-button switch of heating of back glass / of rear-view mirrors is located directly under the switch of the alarm system and is equipped by the built in control lamp (the Scheme of an arrangement of controls see the panel of devices of the car an illustration).

Electroheating inclusion allows to remove from surfaces of back glass / of door rear-view mirrors of a condensate, hoarfrost, and even thin наледи. At electroheater inclusion the light indicator lights up built in the button of the switch. Heating switching-off is made by repeated pressing the button.

The threadlike grid of a heating element of a heater is pasted on an internal surface of back glass and demands care in circulation, — try not to damage a grid at glass wiping. Wiping should be made only along heater threads.

Heater functioning is interfaced to the raised level of power consumption, therefore, in avoidance подсадки the storage battery, the timer making automatic switching-off of system after 15 minutes of its continuous work is included in a chain of management of the device.

Do not forget to check before a start of motion quality of the review through back glass of the car.


The horn switch

As the horn button the decorative cover ступичной parts of a steering wheel / of the module of a pillow of safety acts. For activation of a sound signal it is necessary to press the central part of the button.


Switches of management of heating of forward seats

Forward seats of the car are equipped by the built in heaters. Switches of management are located by heating of seats in the bottom part of the central section of the panel of devices (the Scheme of an arrangement of controls see the panel of devices of the car an illustration) and equipped by the built in control lamps. Activation of heating elements (TAN) of driver's and passenger seats can be made independently.

Start the engine, — inclusion of heating of seats at the muffled engine leads to the fast category of the storage battery.

Having pressed the corresponding party of the keyboard switch, choose a demanded mode of intensity of heating, — on a key the corresponding indicator should be highlighted. Management of TAN'S functioning is carried out automatically by means of the thermostat. Do not forget to switch off heating before to leave the car.


Do not cover a seat теплоизоляционными with materials, such as blanket, padded stools or dense covers!
Do not put on seats firm or sharp subjects, try not to suppose risk of damage of an upholstery and the heating element located under it!
Any liquid spilt on a seat immediately collect dry rags!
Do not apply to cleaning of an upholstery of seats any solvents, — use soft детергентами!
In case of infringement of serviceability of functioning of heating of seats address for the help in car-care centre!


The switch of management of functioning of the electric drive of rear-view mirrors

Assemblage of management by functioning of the electric drive of external rear-view mirrors is built in in the panel of devices of the car, to the left of a steering column (the Scheme of an arrangement of controls see the panel of devices of the car an illustration).

Assemblages of management of two types are used: And and Century

In assemblage of type And the choice of a mirror subject to adjustment is made by means of the push-button switch.

L — the Left mirror
R — the Right mirror


 PERFORMANCE ORDER

  1. Include ignition (positions ON or АСС a key).
  2. Pressing the corresponding party of the push-button switch make a choice of a mirror subject to adjustment.
  3. With the help джойстикового the switch make updating of position of the chosen mirror.
  4. After adjustment end repeatedly press the button for a drive conclusion in neutral position, is it is necessary that by casual pressing the button not to break adjustment.

In type assemblage In a mirror choice it is carried out by поворачивания handles unique джойстикового the switch in the corresponding party. The further actions are similar described above for system of type And, — do not forget to return the handle in neutral position.

L — the Left mirror
R — the Right mirror


Switches of management of electric drive functioning стеклоподъемников

The electric drive стеклоподъемников remains active within even 45 seconds after ignition deenergizing, opening within the stipulated term of any of forward doors of the car leads to switching-off of giving of a food on a drive.


The main control panel electric drive functioning стеклоподъемников

1 — the Switch стеклоподъемника the left back door
2 — the Switch стеклоподъемника a driver's door
3 — to Press for glass lowering
4 — to Pull for поднимания glasses

5 — the Button of activation of the uniform lock
6 — the Switch стеклоподъемника the right back door
7 — the Switch стеклоподъемника the right forward door
8 — the Button of blocking of individual switches of passenger doors

The electric drive стеклоподъемников functions only at the included ignition. The main control panel by electric drive functioning стеклоподъемников marks of doors it is located on an armrest of a driver's door (the Main control panel electric drive functioning стеклоподъемников see an illustration).

For lowering / поднимания glasses use the corresponding individual switch (address to an illustration 14.15). Management possibility стеклоподъемниками all doors from a driver's place (the Main control panel electric drive functioning стеклоподъемников see an illustration) is provided.

Also the button allowing the driver to block regulators of all passenger doors (the Main control panel electric drive functioning стеклоподъемников see an illustration) is provided. For blocking switching-off press the button блокиратора repeatedly. For lowering / поднимания glasses press / delay a key of the corresponding switch and keep it in this position.

Possibility of machine translation of glass of a driver's door in extreme bottom position is provided, — quickly enough strongly to press key AUTO of the control panel of a driver's door (at release slightly pressed key glass lowering will stop). To suspend process of automatic lowering of glass delay a key upwards.


Management of functioning of a drive of the top hatch

The electric drive of the top hatch remains active within even 45 seconds after ignition deenergizing, opening within the stipulated term of any of forward doors of the car leads to switching-off of giving of a food on a drive.


The electric drive of the top hatch functions only at the included ignition. The hatch cover can move back, in parallel a roof surface, to bend forward with lifting of its back edge.


The control panel is located by functioning of the electric drive of the top hatch on the ceiling console of the car.

To shift a hatch cover wring out рычажок the left switch of the panel back (towards the pictogramme) and keep it in this position. Hatch closing is made by отжимания рычажка in an opposite side ().

For transfer of a cover of the hatch in inclined position at first completely close it, then wring out and keep pressed the key of the switch marked with the pictogramme. Cover lowering is made by отжимания a key opposite side.

In addition top hatch is equipped sun-protection шторкой. At moving of a cover of the hatch шторка it is cleaned automatically. Closing шторки is made manually.

Watch, that passengers were not put out in the hatch during car movement. Before hatch opening clear a cover of a moisture, snow, a dust and other extraneous adjournment. Do not put on a cover of the hatch and a surface of a roof of the car near to the hatch any heavy subjects!
At refusal of the electric drive of a cover of the hatch the car should be driven away on a car repair shop for performance of corresponding regenerative repair.


The switch of the uniform lock

Access, protection see.


Switches of management of functioning of the electric drive of adjustment of position of forward seats

Elements of systems of safety see.


The switch of modes of functioning of a distributing box (4WD)

Operation Receptions see.


Switches of management of functioning темпостата

Instructions for use a control system of the speed (темпостатом) see.


The switch of an all-wheel drive mode

Operation Receptions see.


The ignition switch

Removal and installation of the lock of ignition/blocking of a steering column see.


Hours

Digital watch is built in in a regular audiosystem (the Comfort see). Indications of hours are displayed the display only at the included ignition (a key in position ON or АСС). After switching-off of an onboard food of the indication of hours are dumped and should be established anew.


Time installation

Installation of indications of current hour is made by means of the button (), minute — by means of the button ().

By means of button CLOCK on the audiosystem control panel the choice of a mode of functioning of the display (hours / a radio tape recorder) is made.

In a mode «CLOCK» indications of current time have an absolute priority, — parametres of functioning of an audiosystem will be displayed only quickly at change of modes.

After realisation of adjustment of current time the display is translated in a mode «CLOCK» automatically.


Sockets of onboard power supplies


Two variants of execution of the socket of onboard power supplies

The socket of an onboard food is intended for connection of an auxiliary electric equipment. The key should be turned in position ON or АСС.

On the car it is provided two sockets of a food, — one in a back face wall of the central console, the second — in the right back corner of a luggage space, near to a cover of a ware box. Both sockets are equipped by a protective cover which should be held at not connected equipment closed (see an illustration Two variants of execution of the socket of onboard power supplies).


Safety measures

  • Pressure of the onboard power supply makes 12 volt, — do not connect to the socket consumers capacity over 120 Vt (10)!
  • The socket is not intended for inclusion at it cigarette Lighter!
  • In order to avoid a discharge of the storage battery at use of an auxiliary electric equipment do not suppress the engine!
  • Try not to use an auxiliary electric equipment at the included headlights, air conditioner, or heating of back glass!
  • Before extraction from the socket of a plug of electroconducting without fail switch off a food of the used auxiliary electric equipment!
  • The plug of electroconducting of the connected equipment should enter into the socket against the stop, providing reliable electric contact!
  • In a usage time of a surface of the socket and a plug of electroconducting connected to it can be warmed up to a heat and remain разогретыми during even some time after switching-off!


Прикуриватель and ashtrays


Site and use rules cigarette Lighter and ashtrays

Composers of the present Management do not recommend to use a nest cigarette Lighter as a nest of selection of an onboard food (see above).

Прикуриватель it is located in the bottom part of the central section of the panel of devices (the Scheme of an arrangement of controls see the panel of devices of the car an illustration) and functions only at the included ignition (positions ON and АСС). For inclusion cigarette Lighter drown before click its button (the Site and use rules cigarette Lighter and ashtrays see an illustration). After heat filched the button automatically with click will return to a starting position.

In order to avoid an exit cigarette Lighter out of operation, do not hold its button during spiral heating!

The forward ashtray is built in in a forward part of assemblage of the central console directly under прикуривателем, back is located in a back part of the console, more to the right of a nest of selection of an onboard food (the Site and use rules cigarette Lighter and ashtrays see an illustration).


Монетница

Монетница it is built in in the left part of the panel of devices (the Scheme of an arrangement of controls see the panel of devices of the car an illustration) and it is not intended for storage of valuable subjects.


Case for storage of sun glasses

The case for storage of sun glasses is built in in assemblage of the ceiling console and equipped by a latch with the press button.


Do not leave points in a case in the car parked on the open sun, — as a result of heating plastic can fuse!


Coasters

In the car some coasters both opened, and the closed type are provided.

Two complete sets of forward coasters are located in the main section of the central console — more to the right of the lever of raising of a lay brake (coasters of open type) and more to the left of selector AT lever (a coaster of the closed type).


Back coasters it is equipped on the sliding panel in a back face wall of the console, below an ashtray and a nest of selection of a food.


Using coasters of the closed type should be made only during car parking!


Ware boxes


The main ware box

The main ware box is built in in the right part of the panel of devices, under the module of a passenger face-to-face pillow of safety (the Scheme of an arrangement of controls see the panel of devices of the car an illustration).

Unlocking / lock-out of a ware box can be made only by means of the basic key. For opening of a cover of a box it is necessary to delay on itself the handle of its lock, — защелкивание the lock it is made automatically at cover closing. Box opening at the included ignition is accompanied by automatic inclusion of its illumination.


Leaky closed cover of a ware box at road and transport incident can become the reason serious травмирования the passenger sitting on a forward seat even if it will be fastened a seat belt!


Console ware box


Design of a console ware box

One more ware box, the smaller size, built in in a back part of the central console, consists of two branches, is equipped by a folding cover, intended for storage of route charts and equipped by a folding table-top and картодержателем (the Design of a console ware box see an illustration).


Ware boxes of a luggage space


Order of providing of access in branches of a lateral ware box of a luggage space


Equipped in a floor of a luggage space the ware box is equipped by a cover leaning back on loops

 

The ware boxes equipped in a luggage space are not intended for storage of valuable subjects.

In a luggage space it is equipped two ware boxes. One of boxes is located in the right lateral wall and equipped by the demountable cover fixed by two rotary clamps, in a floor of box space one more small branch with the cover equipped with a press clamp (the Order of providing of access in branches of a lateral ware box of a luggage space see an illustration) is located. At closing of covers track reliability of fastening of covers clamps.

The second box is located in a niche in a floor of a luggage compartment, under a carpet covering and is equipped by a cover leaning back on loops (the ware box see an illustration Equipped in a floor of a luggage space it is equipped by a cover leaning back on loops).


The luggage space equipment


Armature for fastening of cargo placed in a luggage space

For reliable fixing of transported cargo in a car luggage space some hooks are provided.

A.

B.

Four hooks are fixed on lateral stacks of branch (under two from each party — A), two from above over lateral window leaves and four more on a floor (B).

Hooks are intended for fastening to them of cables fixing cargo and extensions and calculated on loading no more than 10 кГс everyone.


The scheme of fastening of a luggage network

Four back hooks can be used for fastening to them a luggage network.

Hooks And and In are not intended for network fastening.


The weight of cargo fixed by a network should not exceed 13.6 kg!
Cargo in a luggage space should not take places above level of the top cut of backs of seats!


Top шторка a luggage space

Шторка it is intended for concealment of subjects being in a luggage space from an extraneous sight. The taking up drum шторки is fixed behind a back of a back seat. Having pulled, unwind шторку and fix its corners on lateral hooks.


Do not put from above on шторку any subjects which can easily break during sharp braking and put a trauma to passengers sitting in salon!
Do not leave removed from holders шторку in a luggage space!
At unwinding шторки track reliability of fixing of its corners on luggage space hooks!


The top luggage carrier

The site cross-section реек frames of the top luggage carrier can change in a longitudinal direction concerning a diametrical plane (ДП) the car.

Lay luggage a luggage carrier between рейками () a luggage carrier, adjust position of the last, then attach to them luggage by means of a cord, — specially for this purpose on lateral рейках frames are provided adjustable loops.

Try to distribute cargo transported on a roof in regular intervals. The total weight of luggage should not exceed 45 kg. Also track, that vehicle gross weight (GVWR) and axial loadings (GAWR) did not exceed admissible values under Specifications (see the information resulted on a certified label on a back rack of a driver's door — Introduction see, the Head the Maintenance instruction also see).


Sun-protection peaks


Variants of application of sun-protection peaks

Two collapsible sun-protection peaks are located over an upper edge of the wind flew down the car and serve for protection of eyes of the driver and the forward passenger against hit of direct solar beams. If beams fall in front, the peak should be lowered simply, having turned it on axial loops downwards (Variants of application of sun-protection peaks see an illustration). For protection against light falling sideways, the peak should be liberated from an internal loop and to develop towards a door. In case of need at the turned peak for protection against frontally directed beams the additional guard can be lowered.


Internal rear-view mirror

By design of a drive of an internal rear-view mirror it is provided two regular positions: one is intended for movement in the daytime, another — in dark. In the second position reflecting ability of a mirror decreases that promotes easing of blinding action of headlights moving behind vehicles. Transfer of a mirror from day position in night also is back made by means of special, built in in assemblage from below рычажка. Pressing on рычажок forward or back, choose demanded position of a mirror.


Collapsible external rear-view mirrors

The design the basis of door rear-view mirrors allows to put them, densely pressing to glass of doors.


Toilet pocket mirror

The toilet pocket mirror is established in a sun-protection peak, protected by a cover and equipped by illumination (see more low).


Devices of internal illumination


Ceiling fixtures

On the panel of a ceiling upholstery two ceiling fixtures settle down: central and luggage space illuminations.

Polzunkovye switches of both fixtures have on three fixed positions. In position activation of fixtures occurs each time at opening of any of car doors.

At performance listed below conditions fixtures will continue to function within 30 seconds:

  • One of forward doors of the car leans from panel DU of the multipurpose controller or by means of a key if all doors of the car were in closed position;
  • At разблокировании a driver's door at the ignition key taken from the lock;
  • At opening and the subsequent closing of a driver's door while other doors of the car remain closed;
  • At extraction of a key from the ignition lock behind closed doors the car.

Switching-off of ceiling fixtures at the activated 30-second timer occurs in following situations:

  • At lock-out of a driver's door by any of regular ways;
  • At ignition inclusion.

Positions of switches ON and OFF correspond to constantly included and constantly switched off conditions of fixtures accordingly.

With a view of economy of expenses of the electric power function of automatic switching-off of all internal fixtures which switches are translated in position ON on the expiration of 10 minutes after ignition deenergizing is provided. For repeated activation of fixtures it is necessary to turn a key in position ON.

After performance described above procedure switching-off of fixtures on the 10-minute timer will occur in following cases:

  • Opening or closing of any of doors;
  • Unlocking or lock-out of a driver's door;
  • Key insertion in the lock of ignition or its extraction from the lock.


Personal fixtures

Two personal fixtures are built in in the panel of the ceiling console of the car. Fixtures are equipped by push-button switches and submit to the general scheme of functioning of the 10-minute timer of internal lighting devices (see above).


Illumination of a toilet pocket mirror

The toilet pocket mirror built in in a sun-protection peak is equipped by the individual illumination which activation occurs at opening of a protective cover of a pocket mirror.

On pocket mirror illumination the scheme of functioning of the 10-minute timer of internal lighting devices (see above) also extends.


The built in universal device of remote radio management HomeLink®


The general information

The built in universal device of remote radio management (Transceiver) HomeLink® allows to unite in the convenient image functions to three separate devices of radio management and allows to operate functioning of the majority of radio frequencies of actuation mechanisms working in a range, such as a drive of a garage door, activators of door-locks and security systems.

A transceiver food is carried out from the onboard storage battery that excludes necessity for performance of periodic replacement of an element of a food, memory is organised by ROM principle that means absence of necessity of repeated data input after battery switching-off.

After introduction in the transceiver of a program code the original control panel (charm) should be kept on a case of occurrence of necessity of repeated programming (for example, in case of acquisition of the new car). At car sale the program code of the transceiver should be removed from memory of the device for safety. See more low more in detail.

Built in Universal Transceiver HomeLinkj is not intended for use with actuation mechanisms of opening of garage doors in which function emergency останова backspacing inclusions is not realised. The given requirements have been standardised for actuation mechanisms of release since April, 1st, 1982!
At input of a program code of a door of garage can start open or be closed spontaneously, — track, that in a doorway there were no people or pets!
Transceiver programming should be made at the muffled engine!


Programming of Universal Transceiver HomeLinkj

 PERFORMANCE ORDER

  1. At the switched off ignition (a key in position OFF) press and keep two external buttons of the control panel of the transceiver and keep their pressed until the light indicator (approximately 20 seconds) will start to blink, — during performance of the given procedure memory of the device should be cleared of the operating factory code entered into it by default.

At input in memory of the transceiver of the additional data necessity for performance of the given procedure is absent.

  1. Bring the working end of the control panel brought in memory of system of the equipment, to the transceiver on distance approximately 50—125 mm, constantly keeping an eye on the light indicator.
  2. Two hands simultaneously press the button of a control panel and the chosen button transceiver control panels, — keep buttons pressed until finish procedure of following point.

For some actuation mechanisms of a drive of garage doors performance of the procedures resulted in subsection «Programming of the transceiver for conditions of the Canadian market» (see more low) can be demanded.

  1. The control lamp of the transceiver should start to blink, at first slowly, then quickly. When frequency of gleams of a lamp considerably will increase, buttons on both devices can be released.

Input of a program code is made for the remained two buttons of the transceiver in a similar manner with lowering of procedure of removal of a factory code.


Programming of Universal Transceiver HomeLinkj for conditions of the Canadian market

According to the rules accepted till 1992, duration of continuous radiation of transmitters should not exceed 2 seconds. In such conditions at input of a program code нажимание panel buttons (item 4 of the previous subsection see) should be made cycles in for 2 seconds everyone until frequency of gleams of the light indicator will not reach demanded intensity.

At input of a code of management by the activator of a drive of a garage door, etc. devices it is recommended to disconnect a drive for the period of panel inclusion, in order to avoid damage of its components.


Rules of use of Universal Transceiver HomeLinkj

After input of a corresponding program code the Universal Transceiver can be used for management of a corresponding actuation mechanism (for example, operating functioning of a drive of a garage door). For device activation simply enough to press the corresponding button on transceiver control panels, - during transfer of an operating signal should work the light indicator.


Diagnostics of errors of input of a program code

If it is not possible to enter quickly enough into memory of the transceiver of the information from the manual transmitter, it is necessary to operate as follows.

 PERFORMANCE ORDER

  1. Make replacement of an element of a food of the transmitter.
  2. Track correctness of orientation подносимого to the transmitter transceiver (the party with батарейным a compartment should be outside).
  3. Try to keep simultaneously pressed buttons on both devices reliably enough.
  4. Track, that during input of the information the transmitter was on removal from the transceiver no more than 125 mm. If within 15 seconds frequency of gleams of the light indicator does not increase, confirming success of input of a program code, try to repeat procedure, a few having changed position of the transmitter concerning the transceiver, — constantly keep an eye on the indicator.

If to enter a code it is not possible under no circumstances, address for consultations on firm car repair shop Infiniti.


Removal of a program code from memory of Universal Transceiver HomeLinkj

Possibility of clearing of the data entered for the separate button of the transceiver by a design of the device is not provided. For removal of the entered information it is necessary to keep during an order of 20 seconds pressed simultaneously two lateral buttons on the transceiver control panel. Buttons can be released as soon as the light indicator will start to blink.


Input of a dynamic program code

Activators of a drive of garage doors with a dynamic code have started to be issued since 1996 and can be identified one of next ways:

V representatives of the company-manufacturer of the device.

V.Priznakom of use of a dynamic code is that fact that, despite successful end of procedure of input of a program code from the panel usual way, activation of the corresponding device from the transceiver is not represented possible.

S.Uderzhivajte the corresponding button of the transceiver pressed, — if the actuation mechanism is equipped by a dynamic code, the light indicator of the transceiver at first will be frequent to blink, then, after pair seconds will pass in a mode of a continuous luminescence.

For management from the transceiver the device with a dynamic code, input of a program code should be made as follows.

 PERFORMANCE ORDER

  1. Find on the block приводного the electromotor of an actuation mechanism the fine tuning button, — the exact site and colour of the button can разниться depending on device mark, — in case of need address for the help to representatives of the company-manufacturer.
  2. Press the button, — the adjusting lamp can light up.

Procedure of following point should be finished within 30 seconds from the moment of button pressing.

  1. Firmly squeeze out, then release the programmed button of the transceiver. For end of process of adjustment once again press the transceiver button (the design of some actuation mechanisms demands triple нажимания the programmed button).

Now the actuation mechanism receiver should start to perceive a signal given out by the transceiver. Further programming of the remained two buttons of the device, in case of need, can be made.


Reprogramming of separately taken button of Universal Transceiver HomeLinkj

For change of a program code of separately taken button of the transceiver operate as follows.

 PERFORMANCE ORDER

  1. Press the button of the control panel of the transceiver subject to reprogramming and do not lower it before procedure completion (item 4 see).
  2. When after approximately 20 seconds the light indicator of the transceiver will start to blink slowly, bring to the control panel the manual transmitter of the new device, the chosen button will be intended for management which, the transmitter should be brought to a transceiver surface on distance of 50-125 mm.
  3. Press and keep pressed the transmitter button.
  4. The control lamp of the transceiver should start to blink at first slowly, then quickly, — when frequency of gleams of a lamp considerably will increase, buttons on both devices can be released.

Now the reprogrammed button can be used for management of the new device.


Operations procedure in case of car stealing

At car stealing it is necessary to reprogram actuation mechanisms of all devices put in action from the transceiver which have been not equipped with function of a dynamic code, — in case of need consult at representatives of corresponding firms-manufacturers.

At return of the stolen car it is necessary to make reprogramming of all buttons of the built in transceiver.

According to rules FCC to which the design of Built in Universal Transceiver HomeLinkj answers, the device (1) should not develop unhealthy radiation and (2) should perceive any directed signals, including what can lead to undesirable operations.


The design of Universal Transmitter HomeLinkj meets the requirements of rules FCC and DOC/MDC. Attempts of updating of the transceiver are fraught with cancellation of rights of use by the equipment!

DOC: ISTC 1763К1313

I. D.: CB2V67690.


Onboard коммуникатор Infiniti


The general information


The control panel onboard коммуникатора Infiniti

1 — the Light indicator
2 — the Light indicator of a repeated call
3 — the Light indicator of a finding out of an operative range of a telecommunication network
4 — the Light indicator

5 — the Button of giving of the distress signal «Mayday»
6 — the Microphone
7 — the Button of inclusion of an information mode
8 — Personal fixtures

Basic purpose onboard коммуникатора Infiniti is increase of level of safety of the owner of a vehicle at the expense of granting of convenient variants of a call of the majority of salvage and rescue services. The spectrum of services given by services is defined on a contractual basis.

Коммуникатор provides using possibility with such telecommunication systems, as System of Global Positioning (GPS), mobile telecommunication and the Communication Center of Fast Reaction Infiniti.

The control panel коммуникатора is located on the ceiling console of the car (the Control panel onboard коммуникатора Infiniti see an illustration). Two buttons deduced on the control panel allow to submit in case of need the distress signal and to activate a mode of data exchange with the Communication Center of Fast Reaction Infiniti.

Besides, коммуникатор provides automatic transfer to the centre of fast reaction of the information on operation of pillows of safety and-or the anticreeping alarm system, and also allows to make remote activation of the uniform lock and tracing of the stolen car on a signal of the built in radio beacon.

In order to avoid attention dispersion it is not necessary to use коммуникатором during car movement!
For conducting telephone conversations during movement function «Hands-Free» is provided, — hold a mobile phone under in the special holder. Remember that all attention of the driver should be concentrated to management of a vehicle and tracing of a road situation!
If in the course of negotiations there is a necessity under the authority of any records, it is necessary to park in a safe place!


Some features of the organisation of functioning коммуникатора

  • Giving of the distress signal and inclusion of a mode of data exchange can be carried out only at the included ignition (a key in position ON), or after not less than 3 minutes after its deenergizing.
  • The delay between pressing the button of a fast call or and the answer of the operator of the Communication Center of Fast Reaction makes about 25 seconds during which коммуникатор should establish connection and hand over the coded information on the car.

In case of strong loading of communication lines delay time can increase.

  • The voice communication with Communication the Center is provided at the expense of built in the control panel коммуникатора a microphone (the Control panel onboard коммуникатора Infiniti see an illustration) and a loudspeaker of the right forward door. Sounding volume control can be made by means of the switch of the control panel located on a steering wheel mobile phone functioning (see more low).
  • All located on the panel of devices коммуникатора light indicators, are intended for the control over system functioning (see more low more in detail). At inclusion of ignition indicators are activated for 30 seconds in which course the self-diagnostics system carries out interrogation of a condition of corresponding components. If any infringements during check it is not found out, lamps after the stipulated term should go out.

Performance of cyclic switching of ignition ON-OFF-ON during 3-minute term does not lead to repeated interrogation of a condition of system as last will still remain active.

  • Refusal of deenergizing of indicators and during 30-second term from the moment of ignition inclusion, or their simultaneous operation during any other time at the included ignition testifies to infringement of serviceability of functioning коммуникатора, — address for consultations on firm car repair shop Infiniti.

Infringements not necessarily can lead to functioning refusal коммуникатора.

  • At installation of communication with the Communication Center of Fast Reaction Infiniti коммуникатор transfers data on the car on which it is established and about sites of the given car.


The list of the functions supported коммуникатором Infiniti


Distress signal giving «Mayday»

At hit in an emergency situation press the button on control panels коммуникатора (the first point in the previous subsection see), — the light indicator built in the button should помигать, then pass in a mode of a constant luminescence, confirming activation of a call of the Communication Center of Fast Reaction Infiniti. As soon as communication with the centre will be established, коммуникатор automatically will begin transfer of the standard information package including data and a vehicle, its site and call type (Mayday). On termination of transfer of a standard package the channel of a voice communication with the operator of the centre who is in case of need obliged to provide an immediate call on a scene of corresponding regional salvage and rescue service is activated.

If for any reasons the voice communication with the centre cannot be established, the operator also is obliged to notify on the accepted call a regional life-saving service with instructions of an exact site of suffering disaster of a vehicle. If at an exchange of the vocal data with the centre it will not be transferred the information on an emergency situation, the operator will request from causing in advance stipulated password. Transfer of the false password will be considered as action under the threat of violence and on a scene the corresponding rescue crew will be immediately directed. Having finished negotiations, the operator will continue to trace a situation before help arrival.


Activation of a mode of information interchange

At engine failures and in cases of other breakages in a way when the reason of a non-staff situation cannot be eliminated own forces it is necessary to press the button of activation of a mode of data exchange control panels коммуникатора (the first point in the previous subsection see), — the light indicator built in the button should помигать, then pass in a mode of a constant luminescence, confirming activation of a call of the Communication Center of Fast Reaction Infiniti. As soon as communication with the centre will be established, коммуникатор automatically will begin transfer of the standard information package including data and a vehicle, its site and call type (Information). On termination of transfer of a standard package the channel of a voice communication with the operator of the centre who in case of need will provide a call on a scene of corresponding line fault service is activated. The given mode can be used also for reception of more detailed information on usings onboard коммуникатором Infiniti.


Information transfer about operation of pillows of safety

The fact of operation of pillows of safety is regarded as a sign of hit of a vehicle in a severe accident. In a similar situation onboard коммуникатор makes an automatic call of the centre of fast reaction Infiniti with transfer of a standard package «Mayday» (see above). Having accepted a package, the operator of the centre on duty will try to establish a voice communication with crew of the had an accident car and, in the absence of the answer, is obliged to make a call on a scene of corresponding regional salvage and rescue service and to remain on communication till the moment of arrival of the help.


Remote activation of the uniform lock

If keys from the car have been casually forgotten in car salon, the owner can contact by phone the operator of the Communication Center of Fast Reaction Infiniti (number should be specified in the passport коммуникатора, — it will be reasonable to bring it also in a notebook or memory of a mobile phone) and, naming the password, to request the instruction on remote activation of door-locks.


Function of tracing of the car in case of its stealing

Under certain conditions the Communication Center of Fast Reaction is capable to make tracing of the stolen vehicle equipped onboard коммуникатором Infiniti. On phone call correctly named the password of the authorised owner (number should be specified in the passport коммуникатора, — it will be reasonable to bring it also in a notebook or memory of a mobile phone) the operator of the Center of Fast Reaction is obliged to inform regional police / militian service on the stealing fact and to make attempt of definition of a site of the stolen vehicle (the last is obviously possible only in case will turn the ignition key in the lock in position ON). If attempt of definition of a site has passed successfully, the operator has an opportunity the latent listening of salon of the car, — the corresponding information also will be transferred to police / militian bodies conducting investigation.


Information transfer about operation of the anticreeping alarm system

At operation of the anticreeping alarm system and its functioning it is continuous in a current more than 7 seconds onboard коммуникатор carries out an automatic call of the Communication Center of Fast Reaction Infiniti with transfer of a standard information package.

The call is made at any position of the lock of ignition. Having estimated a situation, the operator of the Center on duty is obliged to notify the authorised owner of a vehicle on alarm system operation. If the owner is in the car, from it the password will be requested. In case of need, if the ignition key will turn in position ON, the operator has an opportunity the latent listening of salon.


The general instructions for use onboard коммуникатором Infiniti


Automatic repetition of a call / dump in a readiness mode

At unsuccessful attempt of installation of communication with the Center of Fast Reaction Infiniti (for example, in case of line employment), коммуникатор will automatically make repeated calls during the certain term defined mainly by the provider of services of a mobile communication, but a two-hour range not exceeding borders. On termination of attempts of installation of communication with the centre (successful or unsuccessful), system automatically comes back in a readiness mode, — in case of need a cycle the call can be activated repeatedly by pressing of the corresponding button control panels коммуникатора. The repetition mode is automatically activated also in case of breakage for any reason of a current communication session with the Center. A unique sign of regular end of a session is transfer of the corresponding coded signal, — the light indicator of a call on the control panel of the device and should go out. All information transferred during a communication session registers.

Sometimes, at weak level of a signal the Communication Center appears not to finish data transmission in a condition, - in case of need renew a session by pressing of the corresponding button control panels.

In case of global natural cataclysms (for example, at earthquake) all communication lines with the Communication Center can appear are overloaded, — in similar situations of attempt of renewal of the broken communication коммуникатором are not made.


Приоритетность calls of the Communication Center

If during negotiating by a mobile phone the call of any of regular calls of the Communication Center («Mayday», «Information», or any of automatic calls, - see above) is made, telephone conversation will be interrupted.


Roaming

If the provider of telecommunication services chosen by you does not give роуминговых services, installation of a communication session with the Communication Center of Fast Reaction Infiniti from remote areas can appear problematic.


Data transmission

By transfer of any information to the Center of Fast Reaction Infiniti all entering data is sorted and as a call, to a site of a causing vehicle, a direction and speed of its movement at the moment of transfer.


Function of global positioning

For definition of an exact site equipped коммуникатором Infiniti a vehicle the satellite Global System of Positioning (GPS) is used. Rotating in an orbit approximately 21 000 km companions GPS continuously radiate radio-waves. Receiver GPS, analyzing signals given out by several companions, calculates an exact site of a vehicle on which it is established, in three-dimensional system of co-ordinates (width, a longitude and height above sea level).

Reception of signals GPS is blocked in places where distribution of radio-waves is complicated. In a similar situation by transfer коммуникатором a standard information package it is used last accepted data GPS. If the data transferred in the Center does not meet standard requirements to reliability, the operator will request the information on its exact site from the owner of a vehicle.

Accuracy of definition of co-ordinates of object in network GPS is influenced by such factors, as an interference of radio-waves, topography of district and weather conditions.

Refusals and errors at positioning can take place at movement in tunnels, near to high-rise buildings or dense лесопосадок, vehicle transportation on a lower deck of the ferry or the bottom platform of the railway car, parking on a covered parking, etc.

Do not establish near to the aerial of receiver GPS in the car any objects, capable to prevent perception of a radio signal.

Try to hold on the greatest possible removal from aerials коммуникатора such sources of radiation, as radio telephones and radio transmitters. In a winter season regularly clear the wind and back has flown down from snow and ice.

The control of functioning of Global System of Positioning carries out the Ministry of Defence of the USA! Told means that signal level sometimes can decrease considerably, and data transmission without the visible reasons to stop.


Contractual requirements on using services of the Communication Center of Fast Reaction Infiniti

For realisation of communication with Communication Center Infiniti from the car your mobile phone should be programmed in the correct image. About ways of installation of contact to representation of communication system always it is possible to consult on firm car repair shop Infiniti.

In due time inform the Communication Center on changes of number of your phone. To Contact corresponding service of the Center always it is possible under number 888-870-9898.

At sale of the car or decision-making on the using termination by services given by the Center also in due time inform the operator on duty.


Activation onboard коммуникатора Infiniti

Activation коммуникатора should be made during the shortest term after the contract conclusion.

For input коммуникатора in action press any of two buttons or panels of its management. After communication session installation the operator of the Center of Fast Reaction on duty will make verification of the data brought in the text of your contract with the representative of company Infiniti, and also will check up serviceability of functioning of the system of positioning GPS established on the car and will give out the short inquiry on services given by system. In summary possibility паролирования access to system will be offered you. During all process of adjustment коммуникатора the system will remain in a demonstration mode during which time from a control panel any trial signals For reception of high-grade access to services given by the Communication Center can be transmitted it is necessary to conclude the corresponding contract and to receive the accounting record.


Other functions

Deenergizing of ignition during a communication session with Communication Center Infiniti should not lead to data link breakage if the onboard storage battery only is not discharged. For the purpose of economy of the expense of the electric power to use коммуникатором it is better at the working engine if only it does not involve danger of a poisoning with carbonic oxide or it is impossible for any other reasons.

Start of the engine during conversation can lead to communication session breakage, — in a similar situation коммуникатор can make attempt of renewal of transfer as soon as the engine will be started.

Using an audiosystem during carrying out of a communication session with the Communication Center is not obviously possible (function Auto mute), except for cases of the latent tracing of a situation onboard in cases of stealing or violence threat (see above).

At activation of functions of tracking at stealing or information transfers about operation of the anticreeping alarm system at use опционально the connected phone, some signals can be transferred to given phone.

At switching from a vocal mode in a mode of data transmission in the end of a communication session in динамиках peep and hissing can be reproduced. The given sounds are not a sign of infringement of serviceability of functioning of system, — their reason is transfer by the modem through which connection, the office information is carried out.

At refusal for any reason of the onboard storage battery during a communication session with the Communication Center, коммуникатор after restoration of giving of a food will make attempt of automatic repetition of last call.


Interpretation of signals of light indicators onboard коммуникатора Infiniti


All indicators are included

  • Short-term (30-second) activation of all indicators is made each time at ignition inclusion. Except for a situation of repeated inclusion within 3-minute cycle ON-OFF-ON.
  • At revealing by system of self-diagnostics of any deviations, switching-off of indicators and at the included ignition do not occur. Serviceability of functioning коммуникатора in the present state of affairs can appear broken.
  • If at ignition inclusion the indicator is activated only, and the button of giving of the distress signal was not pressed, it can be regarded as a sign of infringement of serviceability of functioning of system.


The indicator of the button of giving of the distress signal «Mayday» works in a flashing mode

Indicator "Mayday" blinking is a sign of that the button of a signal transmission of disaster has been pressed, and onboard коммуникатор undertakes attempts of installation of communication with the Center of Fast Reaction Infiniti.


The indicator of the button of giving of the distress signal «Mayday» works in a continuous mode

The continuous luminescence of indicator "Mayday" is a sign of that the button of a signal transmission of disaster has been pressed, and onboard коммуникатор has made connection with the Center of Fast Reaction Infiniti and carries out transfer of a standard information package.


The indicator of the button of inclusion of an information mode works in a flashing mode

Indicator "Information" blinking is a sign of that the button of inclusion of a mode of an exchange has been pressed by details, and onboard коммуникатор undertakes attempts of installation of communication with the Center of Fast Reaction Infiniti.


The indicator of the button of inclusion of an information mode works in a continuous mode

Indicator "Information" blinking is a sign of that the button of inclusion of a mode of an exchange has been pressed by details, and onboard коммуникатор has made connection with the Center of Fast Reaction Infiniti and carries out transfer of a standard information package.


The indicator of a repeated call works in a flashing or continuous mode

Activation of the given indicator is a sign of that last attempt of installation of communication with Communication Center Infiniti has not crowned success and коммуникатор is in a mode of a repeated call (see above).


The indicator of a finding out of an operative range of a telecommunication network works in a continuous mode

Activation of the given indicator testifies that the cellular telephone device is out of an operative range of a network and onboard коммуникатор is not capable to provide a communication channel with the Center of Fast Reaction. At use опционального a telephone set the indicator will work with it in an asynchronous mode.


Indicators of a repeated call and finding out of an operative range of a telecommunication network work in a continuous mode

Simultaneous activation of two given indicators testifies that at the moment of installation of a communication session the car was in an operative range of a telecommunication network, however then left it. The signal has been lost and коммуникатор makes attempts of a repeated call.

In a similar situation of attempt of a repeated call will be made within the next 30 minutes.


Indicators of a repeated call and finding out of an operative range of a telecommunication network join periodically and switched off

The similar picture takes place, when the data exchange session between коммуникатором and the Center of Fast Reaction in a demonstration mode is established.


Requirements on fee of communication service Infiniti

For using services of communication service it is necessary to support in an active condition accounting records of a telecommunication network (timely fee of the provider of a network of a mobile communication) and communication service Infiniti. Cancellation of any of two accounting records will lead to impossibility of using the services given by the Communication Center.


Operating restrictions

Data exchange with Communication Center Infiniti is carried out on the communication channels given by providers of mobile telephone systems in view of what on services of communication service all restrictions operating at using with a mobile communication extend.

A food onboard коммуникатора is carried out from the storage battery established on the car which exit out of operation involves functioning refusal коммуникатора.


Distribution area

At the moment of drawing up of the present management the sphere of action of services of communication network Infiniti extended on limits of 48 main continental states of the USA. On Alaska, Hawaii, in Canada and Mexico using network services it was not represented possible.


The restrictions connected with an overload of communication channels

The quantity of accessible channels of mobile telecommunication in various regions unequally and at a full employment possibility of installation of the next session is blocked. In a similar situation onboard коммуникатор passes in a mode of a repeated call and will continue attempts of installation of communication during time till 2 o'clock (see above). Upon termination of attempts of a repeated call the system automatically comes back in a readiness mode.


Personal identification number (PIN) a mobile telephone system

Some local providers of mobile telecommunication offer the users service at which each call from a cellular telephone is anticipated input of a special PIN-code. Communication system Infiniti does not support the given function and complete with such phone will not function.


Special functions of mobile telecommunication

Some providers of mobile telecommunication give to the users variety of additional services, such as vocal mail, call readdressing, an expectation mode and so forth, — activation of similar functions can bring hindrances at using services of communication service Infiniti.


Directed signals

During a communication session against a voice of the operator of the Communication Center there can be extraneous voices. Similar hindrances speak an interference at distribution of radio-waves and are not a sign of infringement of serviceability of functioning коммуникатора. If hindrances arise during transfer коммуникатором a standard information package, dispatch of the last repeats automatically.


Confidentiality

Data exchange with Communication Center Infiniti is carried out on the communication channels given by providers of mobile telephone systems, not rendering confidentiality services. Told extends and on the information transferred with коммуникатора in the Center and back, — the third party has possibility of listening of a communication channel.


False activation and паролирование

At the conclusion of the contract with Communication Center Infiniti to the user прелагается service паролирования. Application of the unique password will allow to identify the person of the user in following situations (see above more in detail).

  • In need of penetration into the car without keys (keys are forgotten in salon).
  • At action under the threat of violence during data transmission on the channel of an emergency call «Mayday».
  • By an automatic call of the Center during operation of the anticreeping alarm system.


The panel of switches of remote control established on a steering column mobile phone functioning

The panel of switches of remote control is fixed by mobile phone functioning a steering wheel rim (the Scheme of an arrangement of controls see the panel of devices of the car an illustration).

By means of the switches located on the panel the driver can, without distracting from managerial process by a vehicle to make answers to calls from a mobile phone, and also to regulate soundings dynamics.

For reception on a mobile phone call press the control panel button, — the working audiosystem automatically will be disconnected (mode Auto mute) for the period of call reception. Repeated pressing the same button will translate system in a voice communication mode. For end of conversation it is enough to press the button once again.

By means of the top and bottom buttons of the control panel it is possible to regulate loudness of sounding dynamics, - reception is conducted through a loudspeaker of the right forward door.


«On page back
2.3.3. The display of a conclusion of compass readings and the gauge of temperature of external air
On the following page»
2.4. Comfort