12.8. Replacement of lamps of lighting devices
Replacement of lamps of head headlights
At replacement of any lamp, pay attention to following moments:
- Remember that flasks of lamps remain hot within nearby 20 minutes after switching-off of lighting devices. Before to start to work make sure that components have definitively cooled down;
- Flasks of lamps галогенного and the xenon type are filled by gas being under pressure and at sharp stirring can blow up. Try to take such lamps only for a socle and use goggles. Remember that at a flask contact naked fingers on glass there are fatty stains that leads to a premature exit of a lamp out of operation as a result of an overheat. Before installation wipe a flask of a lamp spirit;
- Always check a condition of socles of lamps and contacts of cartridges, before lamp installation without fail smooth out contact surfaces, completely deleting from them a dirt and corrosion traces;
- Watch that the replaceable lamp in accuracy corresponded failed on the electric characteristics (pressure of a food and capacity).
On models Infiniti QX4 block headlights of semi-tight type with replaceable галогенными lamps are used.
The replacement procedure of lamps of other lighting devices is resulted on illustrations:
Order of extraction from cartridges of lamps of the various types used on models Infiniti QX4
The scheme of an arrangement of onboard lighting devices
Replacement of lamps of lighting devices
Replacement of a lamp of illumination of a toilet pocket mirror